AddObject(InterfaceObjectSpecificsD) |
Adds a object to this layer.
Attention: The shape indices of lines, arcs and pads are taken from the symbol table of this layer.
To ensure the right symbol you may have to create the symbol on this layer and update the shape index first.
(Inherited from InterfaceODBLayer) |
AddObject(IObjectSpecificsD) |
Adds a object to this layer.
Attention: The shape indices of lines, arcs and pads are taken from the symbol table of this layer.
To ensure the right symbol you may have to create the symbol on this layer and update the shape index first.
(Inherited from InterfaceODBLayer) |
AOIHighResolutionBMPExport(String, RectangleF, Boolean, Int32) |
Works only with extra licence!
Creates a high resolution Bitmap from the clipping Rectangle and save it.
(Inherited from InterfaceODBLayer) |
AOIHighResolutionBMPExport(String, Size, RectangleF, Boolean) |
Works only with extra licence!
Creates a high resolution Bitmap from the clipping Rectangle and save it.
It expand the area if the aspect ratio have other
(Inherited from InterfaceODBLayer) |
AOIHighResolutionBMPExport(String, RectangleF, Boolean, Int32, Boolean) |
Works only with extra licence!
Creates a high resolution Bitmap from the clipping Rectangle and save it.
(Inherited from InterfaceODBLayer) |
CalculateArea |
Calculate the area of this layer.
(Inherited from InterfaceODBLayer) |
CalculateLayerBounds |
Check all objects on the layer and calculates the bounds new.
(Inherited from InterfaceODBLayer) |
CreateLayerNetList |
Creates the net numbers of this layer with a reset first. The result is written in LayerNetNumber of each IODBObject of this layer.
(Inherited from InterfaceODBLayer) |
DisableLayer |
Deactivate the layer and remove it from drawing list.
(Inherited from InterfaceLayer) |
EnableLayer |
Enable layer for drawing. The layer get a layer color for draw it's elements and will be marked in layerlist.
(Inherited from InterfaceLayer) |
FitToRectangle | Fit the image to the given rectangle. This scales the matrix in such a way it have to be to let the image exactly fit in the rectangle. |
FloodLayer(InterfacePCBIWindow, Double, Double, Double, Double, Double) |
Flood layer with surfaces, this use pcb outline for edge.
(Inherited from InterfaceODBLayer) |
FloodLayer(IPCBIWindow, Double, Double, Double, Double, Double) |
Flood layer with surfaces, this use pcb outline for edge.
(Inherited from InterfaceODBLayer) |
GetAllLayerObjects |
All objects of this layer.
(Inherited from InterfaceLayer) |
GetAllObjectInRectangle |
Get all objects in rectangle.
(Inherited from InterfaceLayer) |
GetAllObjectsOnPosition |
Returns all objects on the point.
(Inherited from InterfaceODBLayer) |
GetBoundsD |
Layer bounds in mils.
(Inherited from InterfaceLayer) |
GetElementCount |
Count of all elements.
(Inherited from InterfaceLayer) |
GetHashCode |
Override the hashcode to compare more instances from one Element.
(Inherited from InterfaceODBLayer) |
GetLayerImage | Get the original image used by this picture layer. This method use a clone to give you no reference to the internal image, the image is a shadow copy if you dispose the original image before you use the new image it will be cleared too. |
GetLayerName |
Name of this layer.
(Inherited from InterfaceLayer) |
GetNetNames |
key = int, value = string
(Inherited from InterfaceODBLayer) |
GetNetNumber |
Returns the local net number from a netname.
(Inherited from InterfaceODBLayer) |
GetNotesOnLayer |
Notes of this layer.
(Inherited from InterfaceLayer) |
GetOutlineFromShapeIndex |
Creates a list oj IODBObject to reproduce the outline of an tool.
(Inherited from InterfaceODBLayer) |
GetOverlayColor |
Color for location.
(Inherited from InterfaceLayer) |
GetOverlayPixelValue |
Ask internal list to get the relevant value on the X/Y location.
(Inherited from InterfaceLayer) |
GetPolygonizeLayerObjects |
Create polygonized objects for all layerobjects
(Inherited from InterfaceODBLayer) |
GetPolygonOutlineFromShapeIndex |
Create IPolyClass outline form shape index.
(Inherited from InterfaceODBLayer) |
GetShapeIndexFromSymbolName |
Check Symbol exists and search for the index, if no symbol found it returns -1.
(Inherited from InterfaceODBLayer) |
GetSpecialSymbolElements |
Check the shape index, if it is a special symbol all elements are returned.
(Inherited from InterfaceODBLayer) |
GetSymbolNameFromShapeIndex |
Returns the ODBString for the ShapeIndex or Empty String
(Inherited from InterfaceODBLayer) |
GetSymbolStringFromShapeIndex |
Returns the ODBString for the ShapeIndex or Empty String
(Inherited from InterfaceODBLayer) |
GetTextLines(InterfaceODBObject) |
Create a list of Lines in structure of the Text.
E.G. a X contains two lines, one from left down to right up and one from left up to right down.
Attention: The Text is not added to the layer, you have to SetSpecifics() of each line to add them to this layer!
(Inherited from InterfaceODBLayer) |
GetTextLines(IODBObject) |
Create a list of Lines in structure of the Text.
E.G. a X contains two lines, one from left down to right up and one from left up to right down.
Attention: The Text is not added to the layer, you have to SetSpecifics() of each line to add them to this layer!
(Inherited from InterfaceODBLayer) |
GetTextLines(String, RectangleD) |
Create a list of Lines in structure of the Text.
E.G. a X contains two lines, one from left down to right up and one from left up to right down.
Attention: The Text is not added to the layer, you have to SetSpecifics() of each line to add them to this layer!
(Inherited from InterfaceODBLayer) |
HasOverlay |
Is overlay used for this layer?
(Inherited from InterfaceLayer) |
HatchObject(InterfacePolyClass, PatternHatch, Double, Double, Boolean) |
Hatch a object with the special pattern.
(Inherited from InterfaceODBLayer) |
HatchObject(IPolyClass, PatternHatch, Double, Double, Boolean) |
Hatch a object with the special pattern.
(Inherited from InterfaceODBLayer) |
Mirror | Mirror the image of the picture layer. |
MirrorX |
Mirror in X direction.
(Inherited from InterfaceLayer) |
MirrorY |
Mirror in Y direction.
(Inherited from InterfaceLayer) |
MoveLayer(PointD) |
Move all elements on this layer.
(Inherited from InterfaceLayer) |
MoveLayer(PointF) |
Move all elements on this layer.
(Inherited from InterfaceLayer) |
Oversize |
Oversize or undersize the layer, with option for only selected and values in percentage.
(Inherited from InterfaceODBLayer) |
PolygonizeCuttedObjectsOnLayer |
Removes negative objects on the layer by polygonizing cutted objects, so that the result looks same, but without negatives objects.
(Inherited from InterfaceODBLayer) |
PolygonizeLayer |
All layer objects will be checked for overlapping, than they are conected to new objects. You get many new surfaces if there are overlapping of objects on the layer.
(Inherited from InterfaceODBLayer) |
PolygonizeLayer(Double) |
All layer objects will be checked for overlapping, than they are conected to new objects. You get many new surfaces if there are overlapping of objects on the layer.
(Inherited from InterfaceODBLayer) |
PolygonizeLayer(Double, Boolean) |
All layer objects will be chacked for overlapping, than they are conected to new objects. You get many new surfaces if there are overlapping of objects on the layer. This removes all other elements from the layer!
(Inherited from InterfaceODBLayer) |
PolygonizeNets |
Polygonizes all overlapping Objects to one polygon. The 'Tag' is the first IODBObject of the chain.
(Inherited from InterfaceODBLayer) |
RemoveAllObjects |
Removes all objects on this layer (no Undo)
(Inherited from InterfaceODBLayer) |
RemoveObject(InterfaceODBObject, Boolean, Boolean) |
Remove one IODBObject from the layer and delete the included data.
(Inherited from InterfaceODBLayer) |
RemoveObject(IODBObject, Boolean, Boolean) |
Remove one IODBObject from the layer and delete the included data.
(Inherited from InterfaceODBLayer) |
RemoveObjects(ListInterfaceODBObject) |
Removes a list of objects (no Undo)
(Inherited from InterfaceODBLayer) |
RemoveObjects(ListIODBObject) |
Removes a list of objects (no Undo)
(Inherited from InterfaceODBLayer) |
ResetFreeText |
Reset all free texts on this layer.
(Inherited from InterfaceODBLayer) |
ResetNetNumbers |
Reset the generated net numbers. This is only for layer net numbers who are calculated by PCB-Investigator. Net numbers from the data are saved in PCB-NetNumbers and never modified.
(Inherited from InterfaceODBLayer) |
Rotate | Rotate the image of the picture layer. |
RotateLayer(Boolean) |
Rotate all elements on this layer.
(Inherited from InterfaceLayer) |
RotateLayer(Double) |
Rotate the layer by the specified angle (degree).
(Inherited from InterfaceODBLayer) |
SaveLayerAsCatia |
saves the layer as catia script
(Inherited from InterfaceLayer) |
SaveLayerAsDXF |
Export a dxf file with all elements of this layer.
(Inherited from InterfaceLayer) |
SaveLayerAsGerber |
Save all layerobjects as gerberfile to the fullPath location.
(Inherited from InterfaceODBLayer) |
Scale | Scale the image in x and y directions. |
SetNetNumber |
Set the net number from a specific net.
(Inherited from InterfaceODBLayer) |
SetOverlayAlpha |
Transparence of the layer image.
(Inherited from InterfaceLayer) |
SetOverlayImage |
Overlay image like in physics to show more information on the layer.
(Inherited from InterfaceLayer) |
Translate | Translate the image by specified offset values. |