ActivateLayersAndOptimizeNetView |
Activate all signal net layers.
Then it zooms to the selected area and activateDrawOnlySelectedMode (does not selecting the net, use SelectNetElements for this).
|
ActivateNetLayers |
Activate all signal net layers.
|
ActivateStep |
Change to current Step. Reorder the steplist internal in PCB-Investigator.
|
ActivateStep(Boolean) |
Change to current Step. Reorder the steplist internal in PCB-Investigator. With option to update controls (if you have no visible instance of IPCBIWindow it is not necessary to update the controls).
|
AddChildStep |
Add single step as child to current step.
|
AddExcellonLayer |
Reads Excellon 1/2 file, errors are reported in the ErrorLog.
|
AddGerberLayer(String, Boolean) |
Reads Gerber or Excellon data, errors are reported in the ErrorLog.
Here is a example how to use this method: http://www.pcb-investigator.com/en/how-create-report-gerber-files
|
AddGerberLayer(String, Boolean, FormatTypes, Int32, Int32, NullableBoolean, Boolean, Boolean, omit_zeros_t) |
Reads Gerber or Excellon data, errors are reported in the ErrorLog.
|
AddGerberLayer(String, Boolean, FormatTypes, Int32, Int32, NullableBoolean, Boolean, Boolean, omit_zeros_t, Boolean) |
Reads Gerber or Excellon data, errors are reported in the ErrorLog.
|
AddGerberLayer(String, Boolean, FormatTypes, GerberImportParameter, Int32, Int32, NullableBoolean, Boolean, Boolean, omit_zeros_t, Boolean) |
Reads Gerber or Excellon data, errors are reported in the ErrorLog.
|
AddGerberLayer(String, Boolean, FormatTypes, Int32, Int32, NullableBoolean, Boolean, Boolean, omit_zeros_t, Boolean, Boolean) |
Reads Gerber or Excellon data, errors are reported in the ErrorLog.
|
AddGerberLayer(String, Boolean, FormatTypes, GerberImportParameter, Int32, Int32, NullableBoolean, Boolean, Boolean, omit_zeros_t, Boolean, Boolean) |
Reads Gerber or Excellon data, errors are reported in the ErrorLog.
|
AddGerberLayer(String, Boolean, FormatTypes, GerberImportParameter, Int32, Int32, NullableBoolean, Boolean, Boolean, omit_zeros_t, Boolean, Boolean, Boolean, Boolean) |
Reads Gerber or Excellon data, errors are reported in the ErrorLog.
|
AddNet |
Add a new Net.
|
AddODBNote |
Add a new ODB++ Note to a layer
|
AddPackage(InterfacePackageSpecificsD) |
Add an single package to the step, by saving the job it will be added to the ODB++ eda file.
|
AddPackage(IPackageSpecifics) |
Add an single package to the step, by saving the job it will be added to the ODB++ eda file.
|
AddPackage(IPackageSpecificsD) |
Add an single package to the step, by saving the job it will be added to the ODB++ eda file.
|
AddStepAttribute |
Add attribute to current step.
|
AOIHighResolutionBMPExport(ListInterfaceODBLayer, ListBoolean, String, RectangleF, Boolean, Boolean, Int32, AOIMatrixSize, Boolean, Boolean) |
A seperate licence is necessary to use AOI!
Creates a Bitmap from all layer in LayerList.
|
AOIHighResolutionBMPExport(ListIODBLayer, ListBoolean, String, RectangleF, Boolean, Boolean, Int32, AOIMatrixSize, Boolean, Boolean) |
A seperate licence is necessary to use AOI!
Creates a Bitmap from all layer in LayerList.
|
AOIHighResolutionBMPExport(ListInterfaceODBLayer, ListBoolean, String, RectangleF, Boolean, Boolean, Int32, AOIMatrixSize, Boolean, Boolean, Int32, Boolean, IPCBIWindowProgressChanged) |
A seperate licence is necessary to use AOI!
Creates a Bitmap from all layer in LayerList.
|
AOIHighResolutionBMPExport(ListIODBLayer, ListBoolean, String, RectangleF, Boolean, Boolean, Int32, AOIMatrixSize, Boolean, Boolean, Int32, Boolean, IPCBIWindowProgressChanged) |
A seperate licence is necessary to use AOI!
Creates a Bitmap from all layer in LayerList.
|
AOIHighResolutionBMPExport(ListInterfaceODBLayer, ListBoolean, String, RectangleF, Boolean, Boolean, Int32, AOIMatrixSize, Boolean, Boolean, Int32, Boolean, Boolean, IPCBIWindowProgressChanged, Int32, Int32) |
A seperate licence is necessary to use AOI!
Creates a Bitmap from all layer in LayerList.
|
AOIHighResolutionBMPExport(ListIODBLayer, ListBoolean, String, RectangleF, Boolean, Boolean, Int32, AOIMatrixSize, Boolean, Boolean, Int32, Boolean, Boolean, IPCBIWindowProgressChanged, Int32, Int32) |
A seperate licence is necessary to use AOI!
Creates a Bitmap from all layer in LayerList.
|
AOIHighResolutionMemoryExport(MemoryStream, ICMPLayer, RectangleD, Int32, Boolean, Color, Int32, Int32, IPCBIWindowProgressChanged) |
A seperate licence is necessary to use AOI!
Fills the MemoryStream with rgb image data (3 bytes/pixel). Layer-Color is used.
Components are drawn with a filled body, without pins and without any label
|
AOIHighResolutionMemoryExport(MemoryStream, InterfaceCMPLayer, RectangleD, Int32, Boolean, Color, Int32, Int32, IPCBIWindowProgressChanged) |
A seperate licence is necessary to use AOI!
Fills the MemoryStream with rgb image data (3 bytes/pixel). Layer-Color is used.
Components are drawn with a filled body, without pins and without any label
|
AOIHighResolutionMemoryExport(MemoryStream, InterfaceODBLayer, RectangleD, Int32, Int32, Boolean, AOIMatrixSize, Boolean, Boolean, Color, Boolean, Int32, Int32, IPCBIWindowProgressChanged) |
A seperate licence is necessary to use AOI!
Fills the MemoryStream with rgb image data (3 bytes/pixel). Layer-Color is used.
|
AOIHighResolutionMemoryExport(MemoryStream, IODBLayer, RectangleD, Int32, Int32, Boolean, AOIMatrixSize, Boolean, Boolean, Color, Boolean, Int32, Int32, IPCBIWindowProgressChanged) |
A seperate licence is necessary to use AOI!
Fills the MemoryStream with rgb image data (3 bytes/pixel). Layer-Color is used.
|
AOIHighResolutionTIFExport(ListInterfaceODBLayer, ListBoolean, String, RectangleD, Int32, AOIMatrixSize, Int32, Boolean, Int32, Int32, IPCBIWindowProgressChanged) |
A seperate licence is necessary to use AOI!
Creates a TIF from all layer in LayerList.
|
AOIHighResolutionTIFExport(ListIODBLayer, ListBoolean, String, RectangleD, Int32, AOIMatrixSize, Int32, Boolean, Int32, Int32, IPCBIWindowProgressChanged) |
A seperate licence is necessary to use AOI!
Creates a TIF from all layer in LayerList.
|
AOIHighResolutionTIFExport(ListInterfaceODBLayer, ListBoolean, String, RectangleD, Int32, AOIMatrixSize, Int32, Boolean, Boolean, Int32, Int32, IPCBIWindowProgressChanged) |
A seperate licence is necessary to use AOI!
Creates a TIF from all layer in LayerList.
|
AOIHighResolutionTIFExport(ListIODBLayer, ListBoolean, String, RectangleD, Int32, AOIMatrixSize, Int32, Boolean, Boolean, Int32, Int32, IPCBIWindowProgressChanged) |
A seperate licence is necessary to use AOI!
Creates a TIF from all layer in LayerList.
|
CalculateBoardArea |
Calculate the area of the board in mils.
|
ClearSelection |
Deselects all elements on the step. This is for all layers in the current step, other steps are not touched.
|
ClearSelection(Boolean) |
Deselects all elements on the step.
|
DeSelectContactNetCMPs |
Deselect the choosen CMPs in contact with the net.
|
DeSelectNetElements |
Deselect the choosen net.
|
DrawColoredImage |
Create image from clipping rectangle, the background is white for this image.
|
FlattenStep(String) |
The step will be flatted, all repeated objects from other steps are placed on the new step.
|
FlattenStep(String, Boolean) |
The step will be flatted, all repeated objects from other steps are placed on the new step.
|
FlattenStep(String, Boolean, Boolean, Char) |
The step will be flatted, all repeated objects from other steps are placed on the new step.
|
FlattenStepOnlySpecificLayers |
The step will be flatted, all repeated objects from other steps are placed on the new step. But only for the layers in LayerNamesToFlatten list (use names toLower).
|
GetActiveLayerList |
Get all active layers, contains not visible layers. It's possible to check the layers in layerlist without drawing them (e.g. for using to calculate distances without showing all elements).
|
GetAllCMPObjects |
Get All used CMPs on top and bot CMP layer.
|
GetAllCMPsWithNetConnectionTo |
Calculate a list of all components on the net.
|
GetAllLayerNames |
Get all layer names.
|
GetAllNetNames |
Returns a list of all net names. If names double defined they added more than one time, depending on there net number.
|
GetAllNetNrs |
Create a list with all net numbers. They sorted in order as in ODB++ defined.
|
GetAllPackages | |
GetAllPackagesD |
Creates a list of all packages in the ODB-Step. Including all packages from the eda file including all component packages who not used.
|
GetAllPackagesD(Boolean) |
Creates a list of all packages in the ODB-Step. Including all packages from the eda file including all component packages who not used.
|
GetBitmap(ListILayer, RectangleF, Int32, Int32) |
Gets a bitmap for the chosen rectangle area, expands the chosen area if it is too small.
|
GetBitmap(ListInterfaceLayer, RectangleF, Int32, Int32) |
Gets a bitmap for the chosen rectangle area, expands the chosen area if it is too small.
|
GetBitmap(IDrawingParameters, RectangleF, Int32, Int32, RectangleF) |
Gets a bitmap for the chosen rectangle area, expands the choosen area if it is too small.
|
GetBitmap(ListILayer, RectangleF, Int32, Int32, Boolean) |
Gets a bitmap for the chosen rectangle area, expands the choosen area if it is too small.
|
GetBitmap(ListILayer, RectangleF, Int32, Int32, RectangleF) |
Gets a bitmap for the chosen rectangle area, expands the choosen area if it is too small.
|
GetBitmap(ListInterfaceLayer, RectangleF, Int32, Int32, Boolean) |
Gets a bitmap for the chosen rectangle area, expands the choosen area if it is too small.
|
GetBitmap(ListInterfaceLayer, RectangleF, Int32, Int32, RectangleF) |
Gets a bitmap for the chosen rectangle area, expands the choosen area if it is too small.
|
GetBitmap(ListILayer, RectangleF, Int32, Int32, Boolean, Boolean) |
Gets a bitmap for the chosen rectangle area, expands the choosen area if it is too small.
|
GetBitmap(ListILayer, RectangleF, Int32, Int32, Boolean, Color) |
Gets a bitmap for the chosen rectangle area, expands the choosen area if it is too small.
|
GetBitmap(ListInterfaceLayer, RectangleF, Int32, Int32, Boolean, Boolean) |
Gets a bitmap for the chosen rectangle area, expands the choosen area if it is too small.
|
GetBitmap(ListInterfaceLayer, RectangleF, Int32, Int32, Boolean, Color) |
Gets a bitmap for the chosen rectangle area, expands the choosen area if it is too small.
|
GetBitmap(ListILayer, RectangleF, Int32, Int32, Boolean, Boolean, Boolean) |
Gets a bitmap for the chosen rectangle area, expands the choosen area if it is too small.
|
GetBitmap(ListILayer, RectangleF, Int32, Int32, Boolean, Color, Boolean) |
Gets a bitmap for the chosen rectangle area, expands the choosen area if it is too small.
|
GetBitmap(ListInterfaceLayer, RectangleF, Int32, Int32, Boolean, Boolean, Boolean) |
Gets a bitmap for the chosen rectangle area, expands the choosen area if it is too small.
|
GetBitmap(ListInterfaceLayer, RectangleF, Int32, Int32, Boolean, Color, Boolean) |
Gets a bitmap for the chosen rectangle area, expands the choosen area if it is too small.
|
GetBitmap(ListILayer, RectangleF, Int32, Int32, Boolean, Boolean, Boolean, Boolean) |
Gets a bitmap for the chosen rectangle area, expands the choosen area if it is too small.
|
GetBitmap(ListInterfaceLayer, RectangleF, Int32, Int32, Boolean, Boolean, Boolean, Boolean) |
Gets a bitmap for the chosen rectangle area, expands the choosen area if it is too small.
|
GetBitmap(ListILayer, RectangleF, Int32, Int32, Boolean, Boolean, Boolean, Boolean, Boolean, RectangleF) |
Gets a bitmap for the chosen rectangle area, expands the choosen area if it is too small.
|
GetBitmap(ListInterfaceLayer, RectangleF, Int32, Int32, Boolean, Boolean, Boolean, Boolean, Boolean, RectangleF) |
Gets a bitmap for the chosen rectangle area, expands the choosen area if it is too small.
|
GetBounds |
Get the step bounds including all substeps.
|
GetBoundsD |
Get the step bounds including all substeps.
|
GetChildStepClasses |
Creates a list of all step and repeat classes that contained in this step.
|
GetChildSteps |
Creates a list of all uses stepnames.
|
GetCMPLayer |
Get a CMP-layer, depending on Top or Bot. This returns null if no such layer exists!
|
GetDatumStepHDR |
Get the step header datum point.
This value is only used for step and repeat positions (has no effect for standard root steps).
|
GetDetailImage |
Create a detail view image from the selected rectangle.
|
GetDistanceBetweenGerberNets |
Calculate the distance of the edges between the net of NetNr1 and the net of NetNr2.
|
GetDistanceBetweenNets |
Calculate the distance of the edges between the net of NetNr1 and the net of NetNr2.
This methode is only for ODB-Data with netinformation!
|
GetDistanceLayerToLayer |
Calculate distance between two layers, it use all layers between exclude the start and end layer.
It's important to have start layer before end layer (do use matrix order in correct sequence).
|
GetHeightOfLayer(String) |
Get Height of layer from layer attributes, this is depending on the matrix layer type. For dielectric layers is a other attribute relevant (.layer_dielectric) and for copper layers it use .copper_weight.
All values are in mils.
|
GetHeightOfLayer(String, MatrixLayerType) |
Get Height of layer from layer attributes, this is depending on the matrix layer type. For dielectric layers is a other attribute relevant (.layer_dielectric) and for copper layers it use .copper_weight.
All values are in mils.
|
GetLayer |
Returns an ILayer with its LayerName or null if the layer doesn't exist.
|
GetLayerAsync |
Asynchronius loading of layer. This can be dangoures! Please use only if you have experiance with async methods.
|
GetLayerAttribute |
Search for attribute of the relevant layer and return it or give an empty string if it dosn't contain the attribute name.
|
GetLayerAttributes |
Load and get back layer attributes.
|
GetNet(String) |
Search for an net with NetName.
|
GetNet(String, Boolean) |
Search for an net with NetName.
|
GetNetCount |
Check the netlist for count of nets in this step (no child steps included!).
|
GetNetNameFromNetNr |
Search for the right name to the NetNr.
|
GetNetNrFromNetName(String) |
Search for the right number to the NetName.
|
GetNetNrFromNetName(String, Boolean) |
Search for the right number to the NetName.
|
GetNets |
Creates a List of INet objects for all netdate in the ODB++-Job.
|
GetODBNotes |
Gets the list of existing ODB++ Notes
|
GetOriginStepHDR |
Get the step header origin point.
This value is only used for step and repeat positions (has no effect for standard root steps).
|
GetOutsideODBLayer |
Get the top or bottom odb layer.
|
GetPCBOutline |
Creates the GraphicsPath of the ODB++ step outline.
|
GetPCBOutlineAsODBObject |
Return the PCBoutline as Surface or null.
|
GetPCBOutlineAsSurface |
Creates an ISurfaceSpecifics from the PCB-Outline.
|
GetPCBOutlineAsSurfaceD |
Creates an ISurfaceSpecifics from the PCB-Outline.
|
GetPCBOutlineList |
Creates the List of objects from the ODB++ step outline.
|
GetPCBOutlinePoly |
Creates a unioned Polygon of all Profile Objects
|
GetSelectedCMPs |
Creates a list of all selected ICMPObjects in this step.
|
GetSelectedCMPsCount |
The count of selected CMPs.
|
GetSelectedElements |
Creates a list of all selected IODBObjects in this step.
|
GetSelectedElementsCount |
The count of selected elements.
|
GetStepAttributes |
Step attributes as strings.
|
GetVisibleLayerList |
Get all visible layers (there are differnece between active layers and visible layers, you can test this by clickling the checkbox in the layerlist).
|
IsLayerFileEmptyOrMissing |
This method checks whether a feature file is existing and check the size for 0 KB. If there is a file with some information (not necessary elements on the layer) it returns false.
|
MirrorPCBOutline |
Mirror the PCB contour in this step
|
MovePCBOutline |
Move the PCB contour in this step.
|
RemoveNetList |
Remove net list from current step.
|
RemovePackage(InterfacePackageSpecificsD) |
Remove package from current ODB++ structure (eda file of this step).
It's important that no component use the relevant package.
This method use the selected package name to identify components on the PCB for usage.
|
RemovePackage(IPackageSpecificsD) |
Remove package from current ODB++ structure (eda file of this step).
It's important that no component use the relevant package.
This method use the selected package name to identify components on the PCB for usage.
|
RotatePCBOutline |
Rotate the PCB contour clockwise or counterclockwise.
|
SaveDXFFile(String, ListInterfaceLayer, Boolean, Boolean, Boolean, Boolean, Double, Boolean, Boolean, Boolean) |
Create DXF File for Layerlist with some parameters and colors are used from layer (only some DXF colors supported e.g. red, grey, yellow...).
|
SaveDXFFile(String, ListILayer, Boolean, Boolean, Boolean, Boolean, Double, Boolean, Boolean, Boolean, Boolean) |
Create DXF File for Layerlist with some parameters and colors are used from layer (only some DXF colors supported e.g. red, grey, yellow...).
|
SaveImageFromActiveLayerList |
Draws an image to hard disk.
|
SelectContactNetCMPs |
Select the choosen CMPs in contact with the net.
|
SelectNetCrossover |
Select Net and all connected nets and all neighbor.
|
SelectNetElements(Int32) |
Select all objects of the choosen net.
|
SelectNetElements(String) |
Select all objects of the choosen net.
|
SelectNetElements(String, Boolean) |
Select all objects of the choosen net.
|
SetChildSteps(ListIStepStepAndRepeatClass) |
Set the steps to repeate in this step, all child steps must have a existing name to repeat them.
Be carefull with using this method, the list of existing step and repeat elements are cleard at the beginning. If you want to add a new step to existing steps use "AddChildStep".
|
SetChildSteps(ListIStepStepAndRepeatClass, Boolean) |
Set the steps to repeate in this step, all child steps must have a existing name to repeat them.
Be carefull with using this method, the list of existing step and repeat elements are cleard at the beginning. If you want to add a new step to existing steps use "AddChildStep".
|
SetDatumStepHDR |
Set the datum fot step header. This is used for Step and Repeat in other steps where this is a child step.
|
SetHeightOfLayer(String, Double) |
Set height of layer in mils.
|
SetHeightOfLayer(String, MatrixLayerType, Double) |
Set height of layer in mils.
|
SetLayerAttribute |
Set an layer attribute value, in ODB++ all attributes start with "." and use lower cases.
|
SetOriginStepHDR |
Set the origin of step header. This is used for Step and Repeat in other steps where this is a child step.
|
SetPCBOutline(InterfacePolyClass, Boolean) |
Set the PCB contour from an list with single Poly Class objects.
|
SetPCBOutline(InterfaceSurfaceSpecificsD, Boolean) |
Set the PCB contour from a ISurfaceSpecifics.
|
SetPCBOutline(IPolyClass, Boolean) |
Set the PCB contour from an list with single Poly Class objects.
|
SetPCBOutline(ISurfaceSpecifics, Boolean) |
Set the PCB contour from a ISurfaceSpecifics.
|
SetPCBOutline(ISurfaceSpecificsD, Boolean) |
Set the PCB contour from a ISurfaceSpecifics.
|
SetPCBOutline(ListInterfaceODBObject, Boolean) |
Set the PCB contour from an list with single objects.
|
SetPCBOutline(ListIODBObject, Boolean) |
Set the PCB contour from an list with single objects.
|
SetPCBOutline(ListInterfaceODBObject, Boolean, Double) |
Creates the outline from a list of objects.
|
SetPCBOutline(ListIODBObject, Boolean, Double) |
Creates the outline from a list of objects.
|
TurnOffAllLayer |
All layers will be turned off.
|
TurnOffAllLayer(Boolean) |
All layers will be turned off.
|
UnloadLayer(ILayer) |
Unload layer e.g. to save RAM.
|
UnloadLayer(InterfaceLayer) |
Unload layer e.g. to save RAM.
|
UpdateNetComponentConnection |
Updates the component pin net information according to the copper net information.
|
UpdateStepInformation |
Update all Step information and lists in PCB-Investigator.
|
WriteIPCFile |
Export a file in IPCD356 format with all net information (including cmp connections).
|