Creating a simple Simulation-Project

For all interested in simulation, we create a simple example to use PCBI-Physics.

We create a one line example to make a new simple simulation.
In some steps we create components, nets and stackup to the simple one line example. Then we can start the simulation.

First we need a empty project and add a line. For component connection we use two pads:

Next step is to add components (simulation based on component pins). We use the component editor and create a new package for testpoints from one of the pads. The testpoint package will be added two times:

To get clearly defined account defines while simulating, you need to set up a profile. As size is not important in this example , we only need to put a rectangle over all elements (Pay attention: Depending on the accuracy of simulation you need to stick to the mimimum size of the PCB contour):

We build the netlist automatically in the netlist dialog:

And the layer stackup must contain two signal layer and one dielectric between them. This layers need thickness and correct order. We use the matrix dialog for it:

Then we start the simulation:

Add new comment

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.